Manufacturers

All Products

Manufacture Part number: 555-5721 Chassis flex is one of the main enemies of good handling. Your front tires can't stay planted if your strut towers ... more info
Manufacture Part number: 555-5711 Chassis flex is one of the main enemies of good handling. Your front tires can't stay planted if your strut towers ... more info
Manufacture Part number: 555-5611-BU Chassis flex is one of the main enemies of good handling. Your front tires can't stay planted if your strut ... more info
Manufacture Part number: 555-5611-S Chassis flex is one of the main enemies of good handling. Your front tires can't stay planted if your strut ... more info
Manufacture Part number: 555-3104 Focus Owners - Be Advised: this is not just any cold air intake kit, this is a Steeda Autosports cold air intake ... more info

Model: STE-555-3101
Price: $179.95

Manufacture Part number: 555-3101 Fits 00-04 Zetec ONLY Dyno tested 5 horsepower on a stock engine. Up to 12 horsepower in a modified engine ... more info
Manufacture Part number: 555-3103 More Air = More Power,This high flow kit It features a mandrel bent tube with silicone hoses and a high flow air ... more info
Manufacture Part number: 555-7233 The Tri-Ax/F™ is more than just a short handle. We re-engineered the entire shift mechanism with an improved ... more info
Manufacture Part number: 555-7224 The Steeda Tri-Ax/ F™ was built for performance without compromising comfort. Rather than just chopping down the ... more info

Model: STE-555-3143
Price: $239.95

Manufacture Part number: 555-3143 Steeda's new high flow air intake for the 2008 through 2011 2.0L Ford Focus is 2 intakes in one all inclusive kit! ... more info
Manufacture Part number: 369-STE-43 Get absolute performance with Steeda's 8mm plug wires. Tailored for a perfect fit, these are the ultimate plug ... more info
Manufacture Part number: 369-STE-44 Get absolute performance with Steeda's 8mm plug wires. Tailored for a perfect fit, these are the ultimate plug ... more info
Manufacture Part number: 369-STE-42 Get absolute performance with Steeda's 8mm plug wires. Tailored for a perfect fit, these are the ultimate plug ... more info
Manufacture Part number: 555-5719 Chassis flex is one of the main enemies of good handling. Your front tires can't stay planted if your strut towers ... more info

Model: STE-555-8300
Price: $219.95

Manufacture Part number: 555-8300 Put real handling into your Focus with Steeda high-performance sport springs. These precision-engineered springs ... more info
Manufacture Part number: 555-1197 Customize your Focus with a Steeda shift knob, CNC machined from billet aluminum to continue our long tradition of ... more info
Manufacture Part number: 555-1195 Customize your Focus with a Steeda shift knob, CNC machined from billet aluminum to continue our long tradition of ... more info
Manufacture Part number: 555-1199 Customize your Focus with a Steeda shift knob, CNC machined from billet aluminum to continue our long tradition of ... more info
Manufacture Part number: 693250 Replace your spongy, factory rubber brake lines with one of these Russell Street Legal brake line kits. The ... more info
Manufacture Part number: 693370 Replace your spongy, factory rubber brake lines with one of these Russell Street Legal brake line kits. The ... more info
Manufacture Part number: 639620 Makes bleeding brakes a one person task Available to fit virtually any hydraulic brake or clutch system Sold 2 per ... more info
Manufacture Part number: 639520 Makes bleeding brakes a one person task Available to fit virtually any hydraulic brake or clutch system Sold 2 per ... more info
Manufacture Part number: 639570 Makes bleeding brakes a one person task Available to fit virtually any hydraulic brake or clutch system Sold 2 per ... more info

Model: RUS-639500
Price: $8.95

Manufacture Part number: 639500 Environmentally friendly Speed Bleeder Bag catches your old brake fluid for a no-spill, no-mess operation. This ... more info
Manufacture Part number: 25202 MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional ... more info
Manufacture Part number: 25201 MagnaFlow Direct-Fit Catalytic Converters by Car Sound are designed for easy bolt-on installation for the Professional ... more info

Model: MAG-14415
Price: $84.74

Manufacture Part number: 14415 Material: 100% Stainless Steel - Mirror Finish Body Shape: 4in. Round Inlet/Outlet Size: 2.25in./2.25in. Body Length: ... more info

Model: MAG-14416
Price: $84.74

Manufacture Part number: 14416 Material: 100% Stainless Steel - Mirror Finish Body Shape: 4in. Round Inlet/Outlet Size: 2.25in./2.25in. Body Length: ... more info
Manufacture Part number: 15864 6 x 14 in. Muffler, 2.25 in. Tubing, Rear Exit, 3.5 in. Tip Material: 100% Stainless Steel Tubing O.D. Size: 2.25in. ... more info
Manufacture Part number: 15697 5 x 8 x 14 in. Muffler, 2.25 in. Tubing, Rear Exit, 4 in. Tip Material: 100% Stainless Steel Tubing O.D. Size: 2.25in. ... more info
Manufacture Part number: 15743 5 x 8 x 14 in. Muffler, 2.25 in. Tubing, Rear Exit, 4 in. Tip, 14 in. Resonator Material: 100% Stainless Steel Tubing ... more info
Manufacture Part number: 15682 5 x 8 x 14 in. Muffler, 2.25 in. Tubing, Rear Exit Material: 100% Stainless Steel Tubing O.D. Size: 2.25in. System ... more info

Model: MSD-8241
Price: $77.98

Manufacture Part number: 8241 Designed to be used with late model Ford waste spark ignition systems 83:1 turns ratio and lower primary resistance ... more info
Manufacture Part number: 89121 Note: Two Required. In some instances when you install an MSD Ignition, the factory ECU may not be able to distinguish ... more info
Manufacture Part number: 8912 In some instances when you install an MSD Ignition, the factory ECU may not be able to distinguish when the coil fires. ... more info

Model: MSD-8969
Price: $166.95

Manufacture Part number: 8969 Are you looking for an RPM Switch that will turn a circuit on, then off at a different rpm? How about one for your late ... more info
Manufacture Part number: 62152 Two Step Rev Control Step Retard LED Monitor The mid 1980s were the beginning of the end for distributors in regard to ... more info
Manufacture Part number: 32939 The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 offers ... more info
Manufacture Part number: 8241 & 32939 MSD Wires The MSD 8.5mm Super Conductor Wire is "the" performance wire. Engineered from the inside out, the 8.5 ... more info
Manufacture Part number: 33-2819 K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent ... more info

Model: KNN-99-5000
Price: $10.87

Manufacture Part number: 99-5000 K&N Recharger® kits contain K&N air filter cleaner and air filter oil for recharging any K&N Air Filter. Restores ... more info
Manufacture Part number: HP-1012 K&N Performance Gold® Oil Filters Originally developed for demanding auto race applications, K&N's premium ... more info

Model: KNN-HP-2009
Price: $11.87

Manufacture Part number: HP-2009 K&N Performance Gold® Oil Filters Originally developed for demanding auto race applications, K&N's premium ... more info

Model: KNN-HP-1002
Price: $11.87

Manufacture Part number: HP-1002 K&N Performance Gold® Oil Filters Originally developed for demanding auto race applications, K&N's premium ... more info
Manufacture Part number: 69-3513TTK Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube ... more info

Model: KNN-69-3510TB
Price: $230.99

Manufacture Part number: 69-3510TB Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube ... more info
Manufacture Part number: 69-3510TP Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube ... more info
Manufacture Part number: 69-3512TP Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube ... more info
Manufacture Part number: 57-2559 The Generation II FIPK ® is K&N's ultimate performance product, designed to increase power by as much as 10%. Most ... more info
Manufacture Part number: 69-3511TR Built for performance and show, the Typhoon™ Air Intake System is a free-flowing mandrel-bent aluminum tube ... more info
 

Shopping Cart  [more]

Your cart is empty.
All discontinued or obsolete parts sales are final. No returns. All prices on this site are subject to change without notice.

Copyright © 2017 Focus Race Parts